Error Opening Files for Read/Write

Symptom: User receives an error message stating, “Caller’s Message: Failed to open the file for read/write. The file ‘F:\sample.las’ cannot be edited. (22630) Exception Information: HRESULT: 0x0 Unable to retrieve extended COM error information” when attempting to open data files for Read/Write.     Probable Resolution: The error is happening because there is another program that…

Share

Setting precision in LAS files output by GeoCue

The LAS tab on the LIDAR 1 CuePac Options dialog, allows you to control the precision in LAS files output by GeoCue (such as occurs when populating or merging working segments, or importing elevation files). The LAS tab can be accessed from within the GeoCue Client by going to Setup –> Options –> LIDAR 1 CuePac.…

Share

Z/I PPS Storage Unit: Error -3: Invalid Reference Path

While running Z/I PPS workflow managed by GeoCue users may encounter a situation when setting up the camera where the storage unit partition paths are blank. Clicking the “New” button then gives a “Storage Unit: Error -3: Invalid Reference Path” error message. The interim workaround for this is to click OK to close the dialog, then…

Share

Basic Training 5 – Buildings and Model Key Points

Basic workflow for processing point clouds and images -> Airborne LIDAR Data and Images -> Basic Training TerraScan and TerraMatch Classify building roofs and model keypoints Video: Basic Training TerraScan and TerraMatch – Basic training 5 280 MB 05/2015 classify points above the ground and on building roofs create a model keypoint file for TerraPhoto

Share

Basic Training 4 – After Ground Classification

Basic workflow for processing point clouds and images -> Airborne LIDAR Data and Images -> Basic Training TerraScan and TerraMatch Continue after ground classification Video: Basic Training TerraScan and TerraMatch – Basic training 4 280 MB 05/2015 classify points in water areas apply a systematic elevation correction to laser data export lattice models (ground model…

Share

Basic Training 3 – Ground classification

Basic workflow for processing point clouds and images -> Airborne LIDAR Data and Images -> Basic Training TerraScan and TerraMatch Ground classification Video: Basic Training TerraScan and TerraMatch – Basic training 3 280 MB 05/2015 remove points from overlapping flightlines design, test, and run a macro for automatic ground classification validate the result of the…

Share

Basic Training 2 – TerraMatch Tie Lines

Basic workflow for processing point clouds and images -> Airborne LIDAR Data and Images -> Basic Training TerraScan and TerraMatch Flight line matching with tie lines in TerraMatch Video: Basic Training TerraScan and TerraMatch – Basic training 2 280 MB 05/2015 classify laser data for the matching task check the flightline mismatch in the data…

Share

Basic Training 1 – TerraScan Project

Basic workflow for processing point clouds and images -> Airborne LIDAR Data and Images -> Basic Training TerraScan and TerraMatch Setting up a project in TerraScan Video: Basic Training TerraScan and TerraMatch – Basic training 1 280 MB 05/2015 coordinate system settings and transformations import and split trajectories load and display laser data, measure point density…

Share

Basic Training for Terrasolid Software

Basic workflow for processing point clouds and images -> Airborne LIDAR Data and Images -> Basic Training TerraScan and TerraMatch -> Get Started Video: Basic Training TerraScan and TerraMatch – Basic training 0  280MB 05/2015 create a new MicroStation design file start Terrasolid software set up the coordinate range for data processing in Terrasolid software

Share

Manually Assigning Flight Line ID’s in TerraScan

Trajectories within TerraScan can have flight line ID’s assigned to them manually via the Trajectories dialog. Open the Trajectory Window Set Trajectory Location Create/Import Trajectories To change the ID of a trajectory select it within the list –> Trajectory –> Edit Information Provide a new number for the trajectory

Share