Exporting the Current Profile Line

About Exporting Profile Lines Sometimes it may be useful to export the current profile line to a file for use in other software applications. The Export Profile command will export the draped line to the current export file you specify. Learn more about setting up profile export How to Export Profile Lines Export Profile Command…

Share

Profile Export Properties

About Profile Export Properties You must select an export file to export profiles to before exporting profiles. The current supported file formats are 3D Polyline Shapefiles, AutoCAD DXF, MicroStation DGN, and ASCII XYZ files. If a pre-existing file is selected, profiles are appended to that file. Otherwise a new file is created. If XYZ files…

Share

Export Cross Section XYZ values

If you used the cross sections point cloud task in LP360 to automate the generation of your cross sections your only output options were Shapefile and DXF. What if I need those cross section XYZ values in another format. Option 1: Use the manual profile export available in the profile view to export your profiles.…

Share

Silently Installing LP360 Clients

When managing the installation of LP360 on a number of computers it may be useful to use a silent install. The standard MSI switches “/qn”  and “/norestart” work, however, there are no command line parameters available at this time to configure the LP360 License Administrator. You should, however, be able to do this using a registration…

Share

Draw Trajectories into Design File

In TerraScan’s Manage Trajectories dialog the Draw into design command draws the trajectories as line elements into the design file. The line elements are drawn on the active level using the active line width and line style settings of MicroStation. The color(s) of the line elements are defined by the command’s settings. The command can…

Share

Import accuracy files

In TerraScan the Import accuracy files command imports an output file from post-processing software that contains accuracy estimates for each trajectory position. The file includes the RMS values for xyz positions as well as for heading, roll, and pitch angles. It is connected to the trajectory file, previously imported using the Import Files command in…

Share

Import Sensor Trajectory Files

In TerraScan the Import files command is used to import raw sensor trajectories into TerraScan. During the import, sensor trajectory information is converted into TerraScan trajectory binary files (*.TRJ). The TerraScan trajectory format is a publicly available format and is described in the Programming Interface section of the TerraScan User Guide. The input files must…

Share

Error in setting up the floating license client (24217)

Symptom: In LP360 License Administrator when configuring the license mode to “Use License Server” for a client machine the process returns an error message, “Error in setting up the floating license client. (24217) Failed to create the floating license file.” Probable Resolution: The License Administrator needs to be run using the right-click and “Run as…

Share

How to Import Macro Action Text Results?

There are many routines in TerraScan which draw features into the design file, such as Vectorize Buildings, Find Paint Lines, Road Section Parameters, Draw Slope Arrows, and Find Wires. When running these routines in a macro step the routine will instead create text files that store the drawing parameters for each feature. These text files are…

Share