GeoCue 2014 Release – Service Pack 5

Details: GeoCue 2014 SP5 adds new coordinate reference systems, limited 64-bit TerraScan for CE support (full support will be in GeoCue 2016), performance enhancements and several fixes, including a lot of cleanup and beefed up tools for LAS v1.4 workflows. Users of GeoCue 2014 are encouraged to apply this service pack at their earliest convenience. Users…

Share

Recommended TerraModeler Settings

The settings in TerraModeler (TerraModeler->General Toolbar->Settings) can be configured to make some processes easier and more suited to typical uses with laser data leading to a more productive workflow. Settings may be shared with multiple users via a network location. It is recommended to leave the folder read only for most users to prevent undesired…

Share

Draw Alignment Sections

Draw Alignment Sections tool draws cross sections along an alignment. Each cross section shows the shape of surface models at a position along the alignment. You can specify the width of the cross sections as a left and a right width perpendicular from the alignment. The alignment element can be any linear element. Valid element…

Share

Unable to create LPUtilities (22703)

Problem: While adding LAS files to the ArcMap document using the LP360 for ArcGIS extension you receive an LP360 COM Exception, “Unable to create LPUtilities (22703)”. Caller’s Message: Unable to create LPUtilities (22703) Exception Information: HRESULT: 0x80040112 Unable to retrieve extended COM error information. Probable Resolution: The “Unable to create LPUtilities (22703)” error message generally…

Share

Maximum Loaded Entity Count Exceeded

Symptom: Attempting to run a process in GeoCue that needs to create a new entity in the database and the process results in an “Unhandled Exception” stating, “Maximum Loaded Entity Count Exceeded”. Probable Resolution: The error message indicates that you have exceeded the maximum entity count setting that you have set for your server. Once…

Share

DMC images hang running RPP

Symptoms: DMC images submitted by GeoCue for dispatch processing will hang running RPP and will not complete processing. Running the process locally shows ZIPPS RPP running with the message “Waiting for new client”. Cancelling out the process may present the message “Unable to load odbcji32.dll”. Running the same images in ZIPPS PPS directly results in…

Share

NGS Releases a New Video on the Importance of Accurate Coastal Elevation and Shoreline Data

NGS Releases New Educational Video! New Video on the Importance of Accurate Coastal Elevation and Shoreline Data This latest video explains the role of topo-bathy light detection and ranging (LIDAR) products in the National Geodetic Survey’s (NGS) mapping and charting program, and how these products provide a critical dataset for coastal resilience, coastal intelligence, and place-based conservation.  Federal,…

Share

ERROR 000816: The tool is not valid

Problem: When you try to run one of the LP360 Arctoolbox tools, such as the “Define LAS Projection”, you encounter an error saying the tool is not valid (ERROR 000816). Probable Resolution: If you have installed the 64-bit GeoProcessing extension it cannot run the 32-bit LP360 tools. ArcGIS does not seem to be able to know…

Share

LP360 64-bit Files in Use During Installation

Problem: While installing LP360 the installer reports “LP360 64-bit Files in Use”. Probable Resolution #1: Verify that all instances of LP360, LP Viwer, or LP360 for ArcGIS are closed. Probable Resolution #2: If the process in use is the “LP360 License Server” – this is something that should only occur on the License Server machine: On…

Share