L1 Processing in EVO: Video Training Demo

The DJI Zenmuse L1 is an entry level system that integrates the Avia Livox LIDAR, IMU, and a 20MP mapping camera on a gimbal fitted to the DJI M300 RTK. When bundled with DJI Terra and GeoCue’s EVO software, it allows users to deliver quality data derived from non-complex environments. This video tutorial will walk…

Share

How to Format the SD Card on DJI Aircraft, Through DJI Go 4

Formatting the SD card through DJI Go 4 is useful when SD card space is needed and you do not want to remove the SD card from the aircraft (or personality cable). Be sure all important information has been downloaded before formatting the card because this process will erase everything. Here are the steps to…

Share

Downloading DJI Log files (DAT file) From Your Aircraft

To download the DJI log file (DAT file) from your aircraft, you will need to use the following steps: Connect your aircraft to your computer with USB cable that was provided with your aircraft.  For Inspire 2 and M200/210, be sure the switch near the USB port is set to “Computer”. Phantom 4 Pro –…

Share

DJI Care Activation

When you purchase a DJI aircraft from AirGon, you have the option to purchase DJI Care for your gimbal and for your aircraft.  If you purchase DJI Care for both, you will receive an activation code for each.  You will need to activate the gimbal and the aircraft separately on the DJI Care activation website.…

Share

Loki™ – Frequently Asked Questions

General:  What is Loki? Loki is a Global Navigation Satellite System (GNSS) Post-Process Kinematic (PPK) direct geopositioning hardware & software solution for low cost DJI drones as well as custom drones using digital single lens reflex (DSLR) cameras such as Nikon, Canon, Sony, etc.  It is aimed at the high accuracy drone mapping community.  …

Share

ASPSuite – Adjust Heights Workflow

This workflow is for AirGon Drone Mapping Suite customers who do not use Loki and instead use ground control points for accuracy. To process images in PhotoScan using control points, it is important for the image heights to be relative to the same vertical datum as the control points. Some drone models cannot determine their…

Share