December 2012 - GeoCue Group

Data Layers in LP360

Posted on December 16, 2012November 17, 2016 by Lewis Graham

LP360 (both LP360 for ArcGIS® and LP360 for Windows®) manages point cloud data at the file level and the Table of Contents (TOC) Layer level. You have probably noticed (if not used) the Active Layer selection tool in LP360. All commands in LP360 act on the currently selected active layer. For example, if you set…

Breaklines should Undergo QA/QC

Posted on December 15, 2012April 15, 2016 by GeoCue Group Support

As with any data, breaklines should undergo a QA/QC process. For breaklines this should entail a check for potential topology errors as well as incorrect elevation values. Since breaklines are used to define and control surface behavior in terms of smoothness and continuity they may have a significant effect when incorporated in a surface model.

Adding LIDAR Data to LP360

Posted on December 2, 2012April 9, 2018 by GeoCue Group Support

For those familiar with ArcGIS, yet new to using LP360, how to add LIDAR data to LP360 for ArcGIS is often confusing. Typical first instinct is to use ESRI’s Add Data Button to load your LIDAR data into the program. The problem is that using this button will add each LIDAR file to a separate…