GeoCue Support » Archives for May 2020 » Page 2
A short tutorial demonstration on manual classification, cleaning up and reclassifying point cloud data, with TerraStereo using quick selection tools. A short demo of the work and results of the whole project. The point cloud was captured with a Riegl VZ-400i Terrestrial Laser Scanner. The full dataset covers the whole downtown are of the city…
True View Evo doesn’t recognize Cycle Folder. This can happen when attempting to load directly from the UMS drive or from an archive folder. The Cycle dialog will not show flight information for the cycle that the user is attempting to select. The file structure requires three basic components to import a cycle properly in…
Locking codes are the only identifying piece of information associated with Applanix POSPac license EIDs. The locking code may change depending on: If physical components of the computer are replaced (network adapter, motherboard) If the customer uses some sort of dock for a laptop The use of a bluetooth adapter If adapter settings are changed…
When using a Loki and M200 setup, flying with a wired camera is an important detail to geotagging survey photos in ASPSuite. But in order to get successful results, the wires connecting the camera and the Loki need to be connected in a specific manner or else external camera events may not be recorded. The…
A walk through of the True View 410 post-flight operations procedure. Refer to the True View 410 Hardware Users Guide for more information.
A demonstration of the True View Heading Alignment Maneuver for models with a LIDAR unit. Refer to the True View 410 Hardware Users Guide for more information.
A walk through of the True View 410 pre-flight operations procedure. Refer to the True View 410 Hardware Users Guide for more information.
A walk through of the True View 410 pre-flight hardware preparation procedures. Refer to the True View 410 Hardware Users Guide for more information.