Error Creating Trajectory Points SHP File

Import Cycle into True View EVO results in the error, “Error Creating trajectory Points SHP File: <path>\Positions\Area_TrajectoryPoints_CYYMMDD-HHMMSS_FYYMMDD_HHMMSS.shp. Error creating Trajectory Point Shapefile”. The full path, including file name and extension, is too long. There is currently a 256 character limit for files in True View EVO. Deeply nested projects will cause this issue. Create the…

Share

Timeout attempting to WRITE LOCK the layout

GeoCue user receives the follow error message: “Timeout attempting to WRITE LOCK the layout. Layout is currently WRITE LOCKED by (machine name).” This is observed on multiple machines opening specific projects. Open the specific projects that are currently locked out on the machine listed in the error message. This will allow other users to write…

Share

Calculate Average Stockpile Height

LP360 has many tools for analyzing stockpiles and terrain. With these tools, it is possible to calculate average stockpile height and quantify this on a pile by pile basis in an automated fashion. The Volumetric Analysis point cloud task (PCT) has the ability to calculate a height dataset when the base and hull is known.…

Share

Missing Geoid File for Source Vertical Coordinate System

Executing the Reproject LAS Point Cloud Task encounters the error, “Error setting up the transformation: Missing geoid file for source vertical coordinate system.” The spatial reference system (SRS) must be properly set on the LAS Layer as that is where the Reproject PCT will be looking for the information. For example, if the original LAS…

Share

ASPSuite: Deployment Identity

ASPSuite encounters an error message when checking for updates, “The deployment identity doesn’t match the subscription.” The security certificate of the installed version of ASPSuite differs from the one in the new package. Due to limitations of the Microsoft Click-Once deployment it is necessary to use the Control Panel to manually un-install the currently installed…

Share

How to Thin the Dataset

A common issue that is encountered when trying to take a bare earth surface generated from LIDAR or photogrammetric point cloud datasets into other programs is that those other programs cannot handle the volume of data. LP360 currently provides four options that can be used to thin the bare earth dataset to allow you to…

Share

Trajectory File Time Range Warning

Starting the Create True View Trajectory process results in a Trajectory File Time Range Warning, “Warning: The Post Process Trajectory File start time was AFTER the start time of the first flight line. Geocoded LIDAR may not cover all of your flight lines. Continue and create all possible Trajectory Files?” This check was put in…

Share