The user receives multiple error messages and has general functionality issues when opening an ArcMap project with the 32 bit LP360 extension enabled. Example error message could be: PCTasksContentsView::ConnectToTrans(): Map object is null. This issue is related to the user opening an existing project, that was saved with the point cloud tasks tab open. The…
The True View UMS (USB Mass Storage) device should meet the following requirements to be used on the system. USB-C connection 3.1 or better FAT32 format for firmware pre v2.0.3, or NTFS after updating firmware to v2.0.3 or later 114 GB minimum capacity Need “SystemConfiguration.json” and “CoreConfiguration.json” files on the drive during operation. True View…
Civil3D has known import DEM issues. The user may notice a systematic shift related to units or grid positioning mismatch when comparing the imported DEM to other data in Civil3D, such as the breaklines that were also generated in LP360/True View EVO as part of the . Note: Depending on the scenario, the user may…
There are a few things to keep in mind when updating the local Applanix POSPac UAV installation, such as to upgrade the POSPac licenses. The process for updating is relatively simple, but there are a few wrinkles to keep in mind when updating so that no issues are encountered by the user. Install the POSPac…
The Terrasolid Product Installation & Setup Guide provides information on how to install, register and configure your Terrasolid products and licenses on Windows for Bentley and Spatix CAD packages. Contents Introduction 1 Invoice 1 About Terrasolid OY 1 About GeoCue Group 1 Terrasolid Hardware Requirements 2 Downloading the Installation Packages 3 Bentley Based Packages 3…
A short tutorial showing how to use the Agisoft Metashape Confidence Value as a reliability attribute for ground classification in dense image matching photogrammetric point cloud classification. Dataset courtesy of ELY-Keskus – owner and Mitta Oy – creator. List of tools used in this presentation: Read Points – Reliability attribute is selected at import. Display…
While attempting to run POSPacCloud to process the trajectory solution for a True View 3DIS, the user encounters an error message stating, “Project Status: EXECUTION_FAILED”. The Project upload was successful. This is a catch all error message that occurs when POSPacCloud was unable to successfully process a trajectory solution. A common cause of this error…
