Converting Raster Data to Local Coordinate Systems with Scale Factor

Often clients require deliverables in local coordinate systems. True View EVO has the full ability to scale and transform point clouds to a local coordinate system. We are actively developing a built-in GUI method to scale and transform raster data, typically orthomosaics. Temporarily we have a workflow using a batch script that will perform this…

Share

Associate Images with Features

One of the features available in True View Evo and LP360, that came from adding image support for the True View 3DIS, is the ability to associate images with existing features in a feature file. Depending on file organization, images can be assigned to specific features and displayed when selected in Feature Analyst. This could…

Share

Editing Orthomosaics using Metashape

Agisoft’s Metashape (formerly Photoscan) has capabilities for editing orthomosaics. One function is to assign only user selected images for a specific area. This is useful for cleaning up areas of the ortho that have: blurriness, moving vehicles, bad image stitching, etc. Created polygons can also be used for defining a subset of the project area…

Share

True View 515 Hardware Users Guide

The True View 515 Hardware Users Guide covers the ins and outs of installing and operating the GeoCue True View 515 3D Imaging System (3DIS) (LIDAR/Cameras). Applies to firmware v3.0.7.1. Contents About GeoCue Group, Inc. 4 About True View® 515 5 A True View Cycle 5 True View Hardware Integration Kit (M600) 6 Installing the Top Plate…

Share

True View 600 Series Hardware Users Guide

The True View 600 Series Hardware Users Guide covers the ins and outs of installing and operating the survey grade Riegl based True View 3DIS (Imaging Systems – LIDAR/Cameras). The True View 600 Series Hardware Users Guide covers the True View 615, 620, 635, and 640. Updated for firmware v3.0.7.1. The True View® 600 Series…

Share

True View 410 Hardware Users Guide

The True View 410 Hardware Users Guide covers the ins and outs of installing and operating the GeoCue True View 410 3D Imaging System (3DIS) (LIDAR/Cameras). Applies to firmware v3.0.7.1 Contents About GeoCue Group, Inc. 4 About True View® 410 5 A True View Cycle 5 True View Hardware Integration Kit (M600) 6 Installing the…

Share

True View EVO System Requirements

Recommended systems for True View EVO Processing: Windows Version 10, Professional (64-bit) or Windows 11 Professional, or their server equivalents. i7 or equivalent CPU.  The more cores, the faster the processing 16 GB RAM (32 GB recommended) Nvidia Graphics recommended but not required Graphics must support Open GL 4.5 Internal Solid State Disk (SSD) with…

Share

LP360 System Requirements

If using LP360 for ArcGIS, your system should meet all requirements of your licensed ESRI™ software, but in all cases, including True View EVO, your system should be no less than: Computer and Processor: PC with a Pentium™ processor or equivalent, 2.2 GHz minimum; Hyperthreading or Multi-core recommended. Memory: 2 GB of RAM required; 16…

Share

Which versions of LP360 run with which versions of ArcGIS?

The ArcGIS version refers to the latest version which that specific version of LP360 is compatible. ArcGIS Version Requires LP360 Version Requires Windows Operating System 9.3.x LP360 2.0.x through LP360 2015.1 Windows XP, Windows Server 2003, Windows 7, Windows Server 2008 (R2) 10.0.x LP360 2.0.x through LP360 2015.1 Windows XP, Windows Server 2003, Windows 7,…

Share

True View UMS Requirements

The True View UMS (USB Mass Storage) device should meet the following requirements to be used on the system. USB-C connection 3.1 or better Format: ExFAT after updating firmware to v3.0.7.1 or later. NTFS after updating firmware to v2.0.3 through v3.0.5.2. FAT32 format for firmware pre v2.0.3. 114 GB minimum capacity Need “SystemConfiguration.json” and “CoreConfiguration.json”…

Share