125 articles True View Installation, Licensing and Updates

A repository of True View related articles covering installation, licensing, and updates to the True View line of drone mapping products. Includes former AirGon products such as Loki and ASPSuite.

Executables Used by LP360 or True View EVO

If your organization has strict security settings, some of the executables installed and used by LP360 or True View EVO could get blocked and prevent LP360/EVO from operating correctly.  It may be necessary to get your IT department to add these executables to an approved list.  The following instructions will show you how to find…

Share

Updating the True View Firmware

The following steps describe the process for updating your True View firmware for both 2DIS and 3DIS (imaging systems). The latest firmware update for the True View systems are available for download and installation by logging into the GeoCue FTP site, using your client credentials provided with the initial licensing information, and browsing for the…

Share

IMU90 Configuration for Applanix POSPac v8.6

Some True View 640 3DIS may contain an IMU90 instead of the IMU82. IMU90 is newer and not supported as part of the standard POSPac UAV v8.6 installation released in February 2021. The IMU90 is supported by POSPac UAV v8.6 SP1 released in May 2021, so the steps below are not necessary if you update…

Share

True View 515 Hardware Users Guide

The True View 515 Hardware Users Guide covers the ins and outs of installing and operating the GeoCue True View 515 3D Imaging System (3DIS) (LIDAR/Cameras). Applies to firmware v3.0.5. Contents About GeoCue Group, Inc. 4 About True View® 515. 5 A True View Cycle. 5 True View Hardware Integration Kit (M600) 6 Installing the Top Plate…

Share

POSPacCloud: Authentication Failed

Attempting to run POSPacCloud to process a trajectory solution in True View EVO results in an authentication failed error, “An error occurred running POSPacCloud.exe: C:\Program Files\Applanix\POSPac Cloud\POSPacCloud.exe AUTHENTICATION_FAILED Unexpected character encountered while parsing value:” Please ensure you have installed the POSPacCloud setup, POSPacCloud_PROD_v0.0.63.zip, available under Downloads -> Software when you log into your Reckon site using…

Share

InstallPyYAML: Requirement Already Satisfied

Trying to run the Create Orthomosaic from Photo Package keeps prompting the user that, “Additional Python components are required. Run: ..\installPyYAML.bat”. However, that has been run already and running it again states, “Requirement already satisified: …in c:\users\%username%\appdata\roaming\python…”, where %username% is the Windows login of the user that ran the installPyYAML.bat the first time. Delete the…

Share

LP360 New Features

The following are just some of the new features that were released with each build of LP360 since version 2.0 through the upcoming release of 2020.2. These are only to name but a few of the enhancements that have been made to the product, not to mention the myriad of bug fixes and improvements to existing…

Share

True View EVO Users Guide

The True View EVO Users Guide is a comprehensive guide to GeoCue’s True View Evo software. True View EVO is a 64-bit Windows® desktop application used for processing and exploiting True View sensor data. It is GeoCue’s LP360 point cloud exploitation product with the addition of a collection of tools for True View sensor data…

Share

PyYAML-5.3.1-cp35-cp35m-win_amd64.whl is not a supported wheel on this platform

Attempting to install the C:\Program Files\Common Files\LP360\MSPy\installPyYAML.bat as part of configuring the Create Ortho from Photo Package tool in True View EVO version 2020.2.33.0 or earlier results in, “Error: PyYAML-5.3.1-cp35-cp35m-win_amd64.whl is not a supported wheel on this platform” Metashape Pro v1.7.x was released after True View EVO v2020.2.33.0, hence, it is not supported in that…

Share

True View 600 Series Hardware Users Guide

The True View 600 Series Hardware Users Guide covers the ins and outs of installing and operating the survey grade Riegl based True View 3DIS (Imaging Systems – LIDAR/Cameras). Covers the True View 615, 620, 635, and 640. Updated for firmware v3.0.5. The True View® 600 Series is GeoCue Group’s second generation LIDAR/camera fusion platform…

Share