TrueView 515vB Hardware Users Guide

The TrueView 515vB Hardware Users Guide covers the ins and outs of installing and operating the latest version of the GeoCue TrueView 515 3D Imaging System (3DIS) (LIDAR/Cameras). For the original version, please see the TrueView 515 Hardware Users Guide.

Contents

About GeoCue ……………………………………………………………………………………………………………………….4
About LP360 Drone…………………………………………………………………………………………………………………5
About TrueView Reckon ………………………………………………………………………………………………………….6
A TrueView Cycle…………………………………………………………………………………………………………………… 7
System Configuration File (SCF)……………………………………………………………………………………………. 7
FCC and IC compliance…………………………………………………………………………………………………………….8
Notice to users……………………………………………………………………………………………………………………….9
Warnings……………………………………………………………………………………………………………………………9
Disposal ………………………………………………………………………………………………………………………….. 10
TrueView Hardware Integration Kit (M600) ……………………………………………………………………………… 11
Installing the Top Plate ……………………………………………………………………………………………………… 11
Installing the Ronin Mount …………………………………………………………………………………………… 14
TrueView Hardware Integration Kit (M300)………………………………………………………………………………. 16
Installing the Antenna Mast Base…………………………………………………………………………………. 16
Installing M300 TrueView Mounting Bracket…………………………………………………………………………. 18
TrueView 3DIS Installation…………………………………………………………………………………………………….. 21
TrueView Battery………………………………………………………………………………………………………………….24
TrueView External Power Adapter…………………………………………………………………………………………..25
TrueView Data Storage Devices ………………………………………………………………………………………………26
UMS………………………………………………………………………………………………………………………………..26
Firmware Update…………………………………………………………………………………………………………………. 27
TrueView 515vB Field Operations …………………………………………………………………………………………….28
Base Station……………………………………………………………………………………………………………………..28
Pre-Flight…………………………………………………………………………………………………………………………29
Disable Obstacle Avoidance……………………………………………………………………………………………….. 31
Center of Gravity (GC) Calibration……………………………………………………………………………………….. 32
LED Lights ………………………………………………………………………………………………………………………. 34
Takeoff preparation ………………………………………………………………………………………………………….. 36
Multifunction button…………………………………………………………………………………………………………. 36
Heading Alignment Maneuver ……………………………………………………………………………………………. 37
After Landing…………………………………………………………………………………………………………………… 39
Measuring GNSS Lever Arm Offsets ………………………………………………………………………………………..40
Z Offset…………………………………………………………………………………………………………………………. 41
X Offset………………………………………………………………………………………………………………………….42
Y Offset…………………………………………………………………………………………………………………………. 43
TrueView Mission Checklist ……………………………………………………………………………………………………44
Debug port……………………………………………………………………………………………………………………….45
Debug cable ……………………………………………………………………………………………………………………..45
Hardware Maintenance………………………………………………………………………………………………………….46
Dust Filter ………………………………………………………………………………………………………………………..46
FAQ …………………………………………………………………………………………………………………………………… 47
Support……………………………………………………………………………………………………………………………….48

Share

GeoCue Support has written 724 articles