True View 435 Hardware Users Guide

The True View 435 Hardware Users Guide covers the ins and outs of installing and operating the GeoCue True View 515 3D Imaging System (3DIS) (LIDAR/Cameras). Applies to firmware v3.0.7.1.

True View 435 hardware

Contents

About GeoCue Group, Inc.	4
About True View® 515	5
A True View Cycle	5
True View Hardware Integration Kit (M600)	6
Installing the Top Plate and Controller Box	6
Installing the Ronin Mount	10
True View Hardware Integration Kit (M300)	12
Installing the Controller Plate, Antenna Mast Base	12
Installing M300 True View Mounting Bracket	14
True View 3DIS Installation	17
True View Battery	21
True View Data Storage Devices	22
UMS	22
Camera SD Cards	22
System Configuration File (SCF)	22
Core Configuration File (CCF)	23
CCFSection6 – POS	23
CCFSection8 – Camera	24
CCFSection11 – Configuration Laser	25
CCFSection15 – Battery	26
CCFSection16 - Cycle	27
CCFSection17 – Storage Auto Delete	28
True View 515 Field Operations	28
1.	Base Station	28
2.	Pre-Flight	29
3.	Disable Obstacle Avoidance	30
4.	Center of Gravity (GC) Calibration	31
5.	Controller Box LEDs	32
6.	Heading Alignment Maneuver	35
7.	After Landing	36
True View EVO	37
Logging in To APX15	37
Configure True View Wi-fi	37
Log in to APX-15	39
Download T04 Files	39
Measuring GNSS Lever Arm Offsets	40
Z Offset	41
X Offset	42
Y Offset	43
True View 3DIS/M600 Pro – Mission Checklist	44
Hardware Maintenance	45
Dust Filter	45
FAQ	47
Support	48
Share

GeoCue Support has written 724 articles