True View 410 Hardware Users Guide

The True View 410 Hardware Users Guide covers the ins and outs of installing and operating the GeoCue True View 410 3D Imaging System (3DIS) (LIDAR/Cameras). Applies to firmware v3.0.5

Contents

About GeoCue Group, Inc.    4
 About True View® 410    5
 A True View Cycle    5
 True View Hardware Integration Kit (M600)    6
 Installing the Top Plate and Controller Box    6
 Installing the Ronin Mount    10
 True View Hardware Integration Kit (M300)    12
 Installing the Controller Plate, Antenna Mast Plus Base and Ronin Mount    12
 Installing Extended Landing Gear Feet    23
 True View 3DIS Installation    24
 True View Battery    28
 True View USB Mass Storage (UMS)    29
 System Configuration File (SCF)    29
 Core Configuration File (CCF)    29
 CCFSection6 – POS    30
 CCFSection8 – Camera    30
 CCFSection11 – Configuration Laser    31
 CCFSection15 – Battery    32
 CCFSection16 - Cycle    33
 CCFSection17 – Storage Auto Delete    34
 True View 410 Field Operations    35
 Base Station    35
 Pre-Flight  36
 Disable Obstacle Avoidance  38
 Center of Gravity (GC) Calibration  38
 Controller Box LEDs 39
 Heading Alignment Maneuver  42
 After Landing   43
 True View EVO    44
 Logging in To APX15    45
 Configure True View Wi-fi    45
 Log in to APX-15    46
 Download T04 Files    47
 Measuring GNSS Lever Arm Offsets    48
 Z Offset    49
 X Offset    50
 Y Offset    51
 True View 3DIS/M600 Pro – Mission Checklist    52
 Hardware Maintenance    54
 Dust Filter    54
 FAQ    56
 Support    57 
Share

AirGon Support has written 181 articles

Leave a Reply