341 articles TrueView Tools, Tips and Workflows Page 18 / 35
GeoCue’s repository of TrueView tools, tips and workflows for the TrueView line of drone mapping products. Includes former AirGon products such as Loki and ASPSuite.
Agisoft – Loading Camera Location Accuracy from XMP Meta Data
Metashape Version 1.5.3 There is an option in Agisoft Metashape/Photoscan to load camera location accuracy from XMP meta data. Below are instructions for changing the settings to allow these accuracies to be loaded automatically. Open Metashape. Click on “Tools” and “Preferences” from the dropdown. Click on the “Advanced” tab and check “Load camera location accuracy…
Adjusting image positions in Agisoft Metashape with ASPSuite local coordinate transformation
ASP Suite has the ability to adjust camera positions based on a local coordinate system. These positions are not updated in the EXIF data, but placed in a file in the “PPK” folder from the ASPSuite project. To import this file into Agisoft Metashape, please follow the instructions below: Open Metashape and import project images.…
LP360 Surface Methods
The surface method defines how z or elevation values are determined when exporting a surface or comparing control points to a surface. Each surface method implements a different way of interpolating elevations from LIDAR points. The following describe the surface methods in more detail. Triangulation (TIN)TIN (Triangulated Irregular Network) partitions a surface into a set…
Intensity – Point Insertion vs Triangulation
When generating intensity rasters using the LP360 Export Wizard or LDExport one has the option of generating the raster using Point Insertion or Triangulation surface methods. Click here to see the raster bit depth available for these raster export formats. Surface Method Type: Triangulation Point Insertion Description Generates a Triangular Irregular Network (TIN) and probes…
FAA Drone Webinars
Files with Geographic coordinate system cannot be processed. (23123)
Recovering missing Inspire 2 camera events with DAT workflow
When performing flights with the Inspire 2 and I2 personality cable (SD cable), it is always best to snap ground photos before take-off and verify that events are being recorded (GNSS light blinks). If the GNSS light does not blink when the ground photos are taken, this means the photo positions are not being recorded…
Loki did not record an SBF file
Viewing two trajectories side-by-side in ASPSuite
Sometimes it is useful to view two flight trajectories side-by-side to ensure the correct amount of coverage is achieved. The following steps explain how to open to solutions in ASPSuite’s diagnostic window. Note: These steps assume the user has processed two flights through ASPSuite so that a pos file has been create for each flight.…