True View 410 Hardware Users Guide

The True View 410 Hardware Users Guide covers the ins and outs of installing and operating the GeoCue True View 410 3D Imaging System (3DIS) (LIDAR/Cameras). Applies to firmware v3.0.7.1

Displays the True View 410 3DIS Hardware

Contents

About GeoCue Group, Inc.	4
About True View® 410	5
A True View Cycle	5
True View Hardware Integration Kit (M600)	6
Installing the Top Plate and Controller Box	6
Installing the Ronin Mount	10
True View Hardware Integration Kit (M300)	12
Installing the Controller Plate, Antenna Mast Base	12
Installing M300 True View Mounting Bracket	14
True View 3DIS Installation	17
True View Battery	21
True View Data Storage Devices	22
UMS	22
Camera SD Cards	22
System Configuration File (SCF)	22
Core Configuration File (CCF)	23
CCFSection6 – POS	23
CCFSection8 – Camera	24
CCFSection11 – Configuration Laser	25
CCFSection15 – Battery	26
CCFSection16 - Cycle	26
CCFSection17 – Storage Auto Delete	27
True View 410 Field Operations	29
1.	Base Station	29
2.	Pre-Flight	30
3.	Disable Obstacle Avoidance	32
4.	Center of Gravity (GC) Calibration	32
5.	Controller Box LEDs	33
6.	Heading Alignment Maneuver	36
7.	After Landing	37
True View EVO	38
Logging in To APX15	39
Configure True View Wi-fi	39
Log in to APX-15	40
Download T04 Files	41
Measuring GNSS Lever Arm Offsets	42
Z Offset	43
X Offset	44
Y Offset	45
True View 3DIS/M600 Pro – Mission Checklist	46
Hardware Maintenance	48
Dust Filter	48
FAQ	50
Support	51
Share

GeoCue Support has written 724 articles