Phantom 4 RTK: Downloading Data for PPK Processing in True View EVO

Downloading Flight Data The following steps provide instructions for downloading your flight data for Phantom 4 RTK processing in True View EVO. Remove the SD card from the aircraft and insert into your laptop. The SD card will contain two folders: DCIM Survey The Survey folder will contain the data recorded during the planned mission. The survey…

Share

LP360 Software Update Guide

A brief overview of the installation process when updating LP360 is as follows: Download the Latest Release of LP360 from the LP360 Installers page on this knowledge base. Open the LP360 License Manager from within LP360 (File -> License Manager) and “check in” or “deactivate” the current license. Run the new installation of LP360 and complete…

Share

What’s New in GeoCue 2020

GeoCue 2020 is the major GeoCue maintenance upgrade release for 2017.  GeoCue has now been in heavy day-to-day production (in commercial release) for about 14 years.  Many of the new features that have appeared in GeoCue are a direct result of the feedback that we received from our user base of GeoCue customers. One significant…

Share

Command Dispatch System Administrator’s Guide

About this Document Welcome to the GeoCue Command Dispatch System Administrator’s Guide. This document supplements the GeoCue User Guide and contains advanced information for the GeoCue Command Dispatch System (CDS). This guide is aimed at advanced users of the Command Dispatch System. Note that most information in this guide is not required for routine dispatched…

Share

LIDAR 1 CuePac User Guide

About this Document Welcome to the GeoCue 2020 LIDAR 1 CuePac User Guide. Note – We have separated the workflow documents into a volume for each major GeoCue component. If you are new to GeoCue, you should first work through the examples in the GeoCue Workflow Guide. This document (the LIDAR 1 CuePac User Guide) assumes…

Share

DEM CuePac User Guide

Welcome to the DEM CuePac User Guide. The reader of this document is expected to be familiar with the basic GeoCue processing system. For information on GeoCue itself, please refer to the GeoCue User Guide. Contents 1 Introduction 2 Creating DGN Products2.1 Creating the Layer and Entities2.2 Setting Product Generation ParametersSelect LAS Classes to IncludeSelect…

Share

GeoCue Environment Builder User Guide

About this Document Welcome to the GeoCue Environment Builder User Guide. This document is intended primarily for users who wish to modify or extend existing GeoCue Environments. Contents 1 Introduction 2 Environment Builder Scope of Operations2.1 Functional Partitioning in Environment Builder2.2 Invoking Environment Builder 3 Terminology3.1 Parameters vs Attributes 4 Environment Builder Interface4.1 Tabs, Tables4.2…

Share

GeoCue User Guide

About this Document Welcome to the GeoCue User Guide for GeoCue 2020. Please note that CuePacs are documented in separate user guides. Contents 1 Introduction 2 An Overview of GeoCue2.1 GeoCue Functions2.2 GeoCue Interface 3 User Manager3.1 Starting User Manager3.2 Changing the Administrator Password3.3 Adding New Users3.4 Adding New Groups 4 License Manager4.1 License Serial…

Share