GeoCue Group’s repository of articles for the GeoCue workflow management product, covering tools, tips, and workflows.
There could be two reasons as to why the processing symbology for entities within GeoCue would not be showing up. Or, in the case of the second scenario. where the vector information for a layer may not display either. Option 1: The symbology buttons on the Symbology Toolbar within the GeoCue Client have not been…
The Repair command is an administrative level tool used for facilitating changes to project entities. The repair tools are accessed through the Setup pull-down menu under Administration (GeoCue Client -> Setup -> Administration -> Repair Tools ). The Status Changer has the ability to change system integrity properties of entities (e.g. locks). 1. Select the…
During the initial setup of a GeoCue LIDAR Processing Project, the user must specify the GPS time storage format for the project. The selected time format is used for all entities and layers within GeoCue. GeoCue will do any kind of conversion on the GPS time values that needs to occur in order for the incoming…
There are times when it is necessary to manually attach a GeoCue database within SQL server. For instance, when hosting the GeoCue database in a SQL instance on a machine that is not the same as the one hosting the GeoCue Server software. If you do not have an existing GeoCue database then GeoCue Server…
Purpose: This technical note explains how to attach files to existing entities within GeoCue. Attaching files within GeoCue starts with Entity Manager. In order to enable the Attach Files Tool within Entity Manager, the user must be a member of the GeoCue Administrators Group. If the user attempting to Attach Files is not a member…
In some cases hardware manufacturers and/or software are not properly setting the GPS Timestamps in an LAS file according to the LAS specification. That specification dictates that the timestamp for LIDAR points be stored in either weekseconds or Adjusted GPS Standard time. This is very important as the tools within TerraScan and other software expects the…
Symptom: User receives an error message stating “An error occurred. Detailed Description: NIIRS10.Repository.Shared.GCRepositoryException: Error writing parameter ‘GEOCUE_SYM_FILTER_INDEX’ for ProjectID = ‘0’ Username = ‘gcuser’ Appname ‘geocue System.Data.SQLClient.SQLException (0x80131904): The log for database ‘geocue’ is not available. Check the event log for related error messages. Resolve any errors and restart the database….” Probable Resolution: The error…
The LAS tab on the LIDAR 1 CuePac Options dialog, allows you to control the precision in LAS files output by GeoCue (such as occurs when populating or merging working segments, or importing elevation files). The LAS tab can be accessed from within the GeoCue Client by going to Setup –> Options –> LIDAR 1 CuePac.…
While running Z/I PPS workflow managed by GeoCue users may encounter a situation when setting up the camera where the storage unit partition paths are blank. Clicking the “New” button then gives a “Storage Unit: Error -3: Invalid Reference Path” error message. The interim workaround for this is to click OK to close the dialog, then…
