True View 515 Hardware Users Guide

The True View 515 Hardware Users Guide covers the ins and outs of installing and operating the GeoCue True View 515 3D Imaging System (3DIS) (LIDAR/Cameras). Applies to firmware v3.0.5.

Contents

  • About GeoCue Group, Inc. 4
  • About True View® 515. 5
  • A True View Cycle. 5
  • True View Hardware Integration Kit (M600) 6
  • Installing the Top Plate and Controller Box. 6
  • Installing the Ronin Mount. 10
  • True View Hardware Integration Kit (M300). 12
  • Installing the Controller Plate, Antenna Mast Plus Base and Receiving Plate. 12
  • Installing Extended Landing Gear Feet. 21
  • Attaching the Ronin Mount to the Receiving Plate.. 22
  • True View 3DIS Installation. 25
  • True View Battery. 29
  • True View USB Mass Storage (UMS). 29
  • System Configuration File (SCF). 30
  • Core Configuration File (CCF) 30
  • CCFSection6 – POS. 30
  • CCFSection8 – Camera. 31
  • CCFSection11 – Configuration Laser. 31
  • CCFSection15 – Battery. 33
  • CCFSection16 – Cycle. 33
  • CCFSection17 – Storage Auto Delete. 34
  • True View 515 Field Operations. 35
    • 1.      Base Station. 35
    • 2.      Pre-Flight. 36
    • 3.      Disable Obstacle Avoidance. 37
    • 4.      Center of Gravity (GC) Calibration. 38
    • 5.      Controller Box LEDs. 39
    • 6.      Heading Alignment Maneuver. 42
    • 7.      After Landing. 43
  • True View EVO.. 44
  • Logging in To APX15. 44
  • Configure True View Wi-fi 44
  • Log in to APX-15. 45
  • Download T04 Files. 46
  • Measuring GNSS Lever Arm Offsets. 47
    • Z Offset. 48
    • X Offset. 49
    • Y Offset. 50
  • True View 410/M600 Pro – Mission Checklist. 51
  • Hardware Maintenance. 53
  • Dust Filter. 53
  • FAQ.. 55
  • Support. 56
Share

GeoCue Group Support has written 911 articles

Leave a Reply