For certain projects, it may be necessary to process and output derivative products in a user defined (local) coordinate system. There are multiple ways to accomplish this, but one is to have matching pairs of projected and local coordinates to define a local coordinate system and derive the transformation. If the rotation, scale and translation…
LAZ is an open source compressed file format useful for more efficiently storing point cloud data than the LAS file format. It is strictly a storage format and must be converted to LAS before it can be used for processing or analysis purposes as the format does not allow for direct edits. Files in the…
Point cloud datasets will at times have noisier than usual low/high point noise that will need to be classified/removed from the project data. This can be caused by: vegetation, site movement (conveyor belts), water presence, etc. LP360 and True View Evo contain multiple methods available for removing this noise that are reviewed below, which can…
For some workflows it may be necessary to change the feature type (point, line, or polygon) of a shapefile to another. The user has this ability create features from existing features using the Create Features from Selected Features tool on the LP360 Feature Edit Ribbon. This tool can be used on any valid shapefile layer.…
When dealing with Polyline or Polygon features in LP360, vertices are color coded based on their place in the beginning or end of the created feature in relation to their drawn direction. This article provides an explanation for what these colors represent. Color Description Red/green vertex color is the start/end of the line on the…
A bench test is a quick way to test functionality and collect diagnostic information about a True View system without mounting it to an aircraft. ITEMS NEEDED True View system True View Battery UMS Antenna Mast with coaxial cable GNSS antenna Controller Box CAT6 Controller Box cable RUNNING THE CYCLE Set up the True View unit…
If your organization has strict security settings, some of the executables installed and used by LP360 or True View EVO could get blocked and prevent LP360/EVO from operating correctly. It may be necessary to get your IT department to add these executables to an approved list. The following instructions will show you how to find…
Multipart features are not supported for the Feature Edit tools in LP360 standalone and may result in an error message such as, “…Complex polygons is not supported”. The polygon must be a single part feature. This can be verified in the Feature Analyst dialog: You will need to first Disassemble Multipart Feature, then run the Split Geometry,…
Contours can be generated from a TIN surface at specified intervals. The contours are saved to one of the three following file formats: shapefiles, DXF, or DGN. Contours are stored as 3D polylines for DXF and DGN file formats. You have a choice to save polylines as 3D or 2D when exporting to shapefiles, where…
The True View 250 Hardware User Guide covers the ins and outs of installing and operating the True View® 250 2DIS. Updated for firmware v3.0.5. The True View® 250 features dual GeoCue mapping camera with a 120° fused field of view for efficient and accurate photogrammetric data collection in a 1 kg package. The system is currently compatible with…
