GeoCue Support » True View
The following steps describe the process for updating the firmware of the TVGO116 and TVGO132. The TrueView Go can be updated automatically using the TVGO App or manually. 1. Update using the TVGO App 1- Make sure to have the TVGOApp version 1.0.0.2 or newer.—-To know the version of the App –> Go to “Settings”…
TrueView firmware v2.2.0-21 (ffb8a694) added payload profiles, which can be saved and loaded onto a TrueView payload to quickly change parameters and settings. These settings include Proximity Mode, Proximity Mode Distance, Save directly to USB drive (TV535), enable camera, Web UI Wi-Fi, Lever Arm values, GNSS antenna type, etc. Profile settings can be accessed by…
With True View GO 116 and 132, you can get the following error: Due to prolonged failure to acquire satellite signals, the device is locked and cannot be used normally. Please wait in an open area for the device to acquire satellite signals normally. It is an error message that happens when the sensor has…
This article explains how to format the hard drives of the TV540. 1. Problem: The reformatting may be needed because: 2. Formatting using LP360 1- Open LP360 as administrator2- Go to sensor ribbon–>TV540 Data Copy Tool3- Click on the icon “Format”4- More details available in TV540 Users Guide –> 7.2.1 Disk Format (Clearing Storage Space)5-…
With True View GO 116 and 132, you can get the following error: Beyond restricted areas, the device is locked and cannot be used normally. Please contact after sales service. It is an error regarding the TRUEVIEW GO SLAM permanent license, this license is region-locked this means that if you change the working region, you…
With True View GO 116 and 132, you can get the following error: Real time point cloud exception, please restart the project! It is a generic error message when the trajectory position is lost. This can happen in areas with reflective services like mirrors or cars. Also, it can happen when the scan is too…
The TrueView GO Hardware Users Guide covers the ins and outs of installing and operating the latest version of the GeoCue TrueView GO LiDAR Handheld (LIDAR/Cameras), TVGO. Contents Table of Contents ………………………………………………………………………………………………. 21.1 Symbol Description …………………………………………………………………………………. 31.2 Recommendations ………………………………………………………………………………….. 31.3 Service & Support …………………………………………………………………………………… 31.4 Disclaimer ……………………………………………………………………………………………… 32 Using Requirements …………………………………………………………………………………….. 42.1 Using Environment………………………………………………………………………………….. 42.2 Tips Before…
This page is no longer updated. Please visit the updated page on the new LP360 Support Knowledge Base for the latest information. There are many tools and keyboard shortcuts that exist within the LP360 product suite, including LP360 for ArcGIS, LP360 Geospatial, LP360 for sUAS, TrueView EVO/LP360 Drone. Remembering all of them and where to…
The outliers should be used whenever the presence of gross outliers has been identified in the input point cloud during the input data verification
Some scenarios may require you to process your TrueView 3DIS data with different lever arm offsets, IMU mounting angles, or Vehicle to reference angles than the ones recorded in the APX at the time of acquisition. For instance, if you move the system to a new drone, but forget to update the lever arm values…