When the drone returns from a mission, the TV540 may display a red status light. Upon reviewing the diagnostics, the LiDAR module may be marked with an error. Cause of the issue, the LiDAR sensor did not receive sufficient power during the flight. As a result: This typically occurs when the drone is operated with…
Problem: While trying to copy the raw data from the TV540, you may encounter an error while importing the data using the TV540 Data Copy Tool: No images available in the TV540 Data Copy Tool, however the images are available inside the sensor ALPHA_CAM hard drive memory. The error is related to the images not…
This article explains how to format the hard drives of the TV540. 1. Problem: The reformatting may be needed because: 2. Formatting using LP360 1- Open LP360 as an administrator2- Go to sensor ribbon–>TV540 Data Copy Tool3- Click on the icon “Format”4- More details available in TV540 Users Guide –> 7.2.1 Disk Format (Clearing Storage…
The TrueView 540 Hardware Users Guide covers the ins and outs of installing and operating the GeoCue TrueView 540 3D Imaging System (3DIS) (LIDAR/Cameras). Contents Table of Contents……………………………………………………………………………………………….21 Reading Tips………………………………………………………………………………………………..41.1 Symbol Description…………………………………………………………………………………. 41.2 Disclaimer ……………………………………………………………………………………………… 42 Usage Requirements……………………………………………………………………………………..52.1 Environment ………………………………………………………………………………………….. 52.2 Tips Before Using ……………………………………………………………………………………. 52.3 Tips During Usage …………………………………………………………………………………… 52.4 Tips After Using………………………………………………………………………………………. 63 Product Description………………………………………………………………………………………73.1…
This page is no longer updated. Please visit the updated page on the new LP360 Support Knowledge Base for the latest information. The TV540 supports multi-platform integration through the TV540 Data Copy Tool, allowing the user to choose the correct carrier setting. Unlike traditional TV sensors, the physical offsets related to IMU/GPS do not need…
