GeoCue Support » You searched for loki
…version installed on your Loki by following steps 1-5 above. The current Loki firmware version is v1.8.2. If your version is older, provide the installed Loki firmware version, the Loki…
…has been turned on, as opposed to depending solely on the battery LED. The Loki is charged using a USB type C cable included with every Loki that is shipped….
The Loki Users Guide – DJI (updated 7/24/19) will guide you through assembly, installation, and how to use the Loki in conjunction with DJI Inspire 2, Phantom 4 Pro, and…
When using Loki with the Inspire 2 Personality cable, DSLR cable, or direct hardwire camera cable, the number of external events recorded can be confirmed by opening the sbf.blocks.txt file…
When using a Loki and M200 setup, flying with a wired camera is an important detail to geotagging survey photos in ASPSuite. But in order to get successful results, the…
If the Loki or the base station recording is interrupted, there will be gaps in the raw data that will affect ASPSuite processing. This can be verified in ASPSuite. After…
The following steps describe the process for checking your Loki battery voltage. Connect Loki to your computer using the supplied USB-C cable Open ASPSuite Click the gear icon Select “Loki Update” Select the…
Watch the video for instructions on how to install Loki on your Inspire 2. How to Install Loki on an Inspire 2 Drone from GeoCue Group on Vimeo….
…problem, try taking the Loki off the drone and screw the antenna directly on to the Loki. Then, place the Loki in an area with a clear view of the…
Problem: To use the SBF file (Loki file), ASPSuite will convert it into Rinex observation and navigation files during the file conversion step (Step 2). If the SBF file has…