Modify the Scan Angle Filter

Note: The following options only apply to LP360 2020.1 or newer. The Live View Filter – Scan Angle tab settings allow the user to filter data based on Scan Angle, which is typically associated with airborne and mobile laser scanning systems. It is the angle that the laser pulse was emitted with respect to a…

Share

Metashape: No Photos Selected when Filtering Photos by Marker

You have imported your control points into Metashape, but when you filter by marker, no photos are selected by the filter and are not visible in the photos pane. You have not run the alignment step. Run the alignment step first, then filter photos by marker. The vertical datum of your images and control points…

Share

Automatic Building Classification

So you have received LIDAR data and you really need to classify all those buildings in a timely fashion. The LP360 Planar Point Filter is an automatic process for classifying planar surfaces such as buildings. Located in the Point Cloud Task tab of the Table of Contents window of LP360, you can quickly set up…

Share

Classification Point Filter Shortcuts

The Classification Point Filter is used often throughout LP360 as part of the set-up routine for many different tasks. For example, many of the Point Cloud Tasks (PCT) require you to use this filter to select the classification source points that are either included or excluded when setting up and executing a PCT task. Classification…

Share