Configuring TerraSlave Licenses

KBA-01035-L8G1K9 This note applies to configuring TerraSlave and TerraScan v020.005 and earlier. For configuring TerraSlave in v020.006 and later see Terraslave and TerraDispatcher. Note: TerraSlave license checkout/in is not currently working. Use node-locked license instructions for all configurations. Purpose & Scope Before using TerraSlave it needs to be configured so that it can find the…

Share

True View: Disable Camera File Transfer on Wind Down

Applies to firmware 2.0.4 & above, on True View 410 Once a flight mission is complete and the aircraft returns to the home position the Wind Down process will initiate due to the proximity mode. Proximity mode allows the Wind Down process to take less time to write the image files to the external UMS…

Share

TerraMatch Key-in Commands

Many tools in TerraMatch can be started by entering a key-in command in the MicroStation Key-in line. The Browse Key-in option of the Key-in line can be used to find out the syntax of a key-in command. To bring up the key-in dialog press enter in an active MicroStation view window. If you select TMatch…

Share

Zero Tie Points while Searching for Automatic Tie Points

Searching for Automatic Tie Points during the TerraPhoto camera calibration results in zero tie points found. The trajectory position and time stamps should not be a factor at that phase of the calibration process (Automatic Tie Point searching). Any influence that that would have, would be brought to light during the manual tie point step…

Share

Configuring Bentley Connection Client for Use with the GeoCue Command Dispatch System (CDS)

Around update 11, Bentley made it mandatory to login to the Bentley CONNECTION Client in order to obtain a valid license for the Bentley product. Doing so broke the ability for the dispatch service user to launch MicroStation. The fix is to login to the machine one time as the GeoCue Dispatch user, login to…

Share

Tutorial: Fitting Matterport Data to Control

Learn how to automatically fit Matterport data to control in this short tutorial that uses TerraScan’s Fit Using Targets tool. The automatic fitting of the data to the right coordinate system uses signal markers, i.e. control panels or targets. Coordinate Transformations – Define transformation to shift incoming data

Share