GeoCue’s repository of TrueView tools, tips and workflows for the TrueView line of drone mapping products. Includes former AirGon products such as Loki and ASPSuite.
What is POSPac? True View 3D imaging System (3DIS) uses Applanix APX Position and Orientation Systems (POS). The POS is a GNSS-aided Inertial Navigation System that provides the precise position and orientation of the sensor at a rate of 200 observations per second. This information is needed to “geocode” LIDAR and determine the exterior orientation of images. Applanix…
To use the SBF file (Loki file), ASPSuite will convert it into Rinex observation and navigation files during the file conversion step (Step 2). If the SBF file has not been converted, and the observation and navigation files are not in the project folder, the error, “Loki Rover Observation and Navigation Files do not exist:”,…
ASPSuite has the ability to filter out GNSS satellites based on elevation mask, and Signal-to-noise ratio (SNR) mask. Before reprocessing with increased mask settings, it is good practice to check the number of valid satellites used in the solution. The following steps describe the process for checking the number of valid satellites used in the…
A DJI gimbal is not pointing forward properly for mapping flights. The top of the camera is slightly skewed to one direction. Please change the following settings in DJI GO or GO 4 depending on your drone configuration: In SmoothTrack Settings, Change Deadband – Pan to “0” and Speed – Pan to “100”. In Movement…
User sees large voids when displaying point cloud data in LP360. This usually occurs when combining dense and sparse point cloud datasets or displaying terrestrial scanner points clouds. The reason points don’t display properly is that points close to each other spatially are not physically near to one another in the LAS file structure. Here…
Selecting any button related to the WMSCatalog results in the error message, “Opening XML for WMSCatalog failed. (22530)”. [Window Title]LP360 Error[Main Instruction]Opening XML for WMSCatalog failed. (22530)[Expanded Information]Exception Information:HRESULT: 0x800401f3Description:Interface not supported (9027)[V] Expand this [ ] Do not show exceptions again. [OK][Footer]Press ‘Ctrl+C’ to copy message to clipboard. Locate and rename the C:\Users\%USER%\AppData\Roaming\LP360\wmscatalog.xml, where…
User encounters an error message when starting ArcMap with the LP360 for ArcGIS extension stating, “Error setting active layer”. If the user clicks through this error message, basic functionality and display issues will occur, often times leading to software crashes. The crash is happening because ArcMap and/or LP360 is not properly installed and/or registered. Re-installing…
The GNSS LED on the True View system isn’t turning green. on systems with the readout display the message gets stuck on, “Getting location”. A solid green GNSS LED on the True View indicates that it has good satellite reception. A blinking yellow GNSS LED can be caused by a number of things. The following…
