Terrasolid software and hardware compatibility

Operating System and Hardware Requirements: To run the 64-bit TerraScan, you must have the following: Quad-core processor or better, good processor frequency 8 GB RAM minimum, 16 GB RAM or more recommended 1024*768 resolution display or better SSD hard disc or other storage device with fast access speed is recommended Windows x64 version 7 or…

Share

Tie Line-based matching for UAS data

The standard workflow for calibrating airborne laser data might not be well suited for laser data gathered by a UAS system due to the nature of how the data was collected. We have adapted the traditional airborne and mobile calibration workflows to this need. Recommended Workflow: Search for tie lines of type Surface based on ground…

Share

RunMacro Exception: System.Exception: Unable to ReadFileNumber after 1000 attempts

Problem: Attempting to Run Macro in GeoCue results in a “RunMacro Exception: System.Exception: Unable to ReadFileNumber after 1000 attempts” error message in the System Messages of the Checklist Step history. Probable Resolution #1: Verify that the GeoCue temp folder has been set by opening Configure Client.  Also, verify that the path in “GeoCue Temp Folder”…

Share

Using FileZilla to Exchange Files with GeoCue Group Support

At times while working with GeoCue Group Support it may become necessary to exchange large files or large numbers of files. We suggest the use of an FTP Client to make this easier. If you don’t have your own, or are not familiar with using an FTP client we suggest using the FileZilla project. FileZilla…

Share

Measure Verticality of a Feature using TerraScan

Often times users are looking for ways to evaluate the verticality, or the angular position of a feature vs the direction perpendicular to the plane of the horizon. In other words, how upright or plumb a feature sits. For instance, poles, support pillars, or walls. Load the laser points into TerraScan Use Draw Vertical Section…

Share

TerraScan: Label Clearance

A new tool has recently been added to the TerraScan Road toolbox (beginning with v017.024) called Label Clearance (Figure 1). This tool builds upon the set of tools using the distance attribute and adds more automation to extracting information from point clouds. The Label Clearance tool enables the quick and easy measurement and display of…

Share

Using different Geiods in ASP Suite

Using Different Geoids in ASP Suite Note: This workflow is experimental. If any issues are encountered using this workflow, please contact AirGon support. Users can load additional Geiods to the ASP Suite.   The file must be in .gtx format. You can convert those files with VDATUM. Here is a link to this: https://vdatum.noaa.gov/download_agreement.php   Find…

Share

PhotoScan Network License on a Virtual Server

Problem: Installing the PhotoScan Floating License Server (FLS) on a Virtual Machine and receive an error message, “This server does not run on a virtual machine, exiting Agisoft initialization error: 5, not restarting. The ISV server is running on the wrong host.” Probable Resolution #1 By default this option is not available, but Agisoft can…

Share

Connecting an LP360 Client to the License Server

To setup LP360 on a client machine that is going to connect to a license server you do not need to request an AUT file. Simply set the client to get it’s licenses from your existing LP360 License Server as outlined in the following steps. Install the software using one or more of the latest…

Share