GeoCue’s repository of articles covering tools, tips, and workflows for processing point clouds in LP360 Drone.
In this article it is explained step by step how to use the Strip Adjustment tool. 1. Introduction Strip Adjustment is a module available in LP360 Drone starting from v2023.2 and is only available within the TrueView workflow. This means that only TrueView and microdrones data processed in LP360 Drone can benefit from Strip Adjustment.…
When a base station file is corrupt or incorrectly recorded (for example: the observation rate is not set correctly or the battery fails), a user may elect to use the efficient SMARTBase or PP-RTX for post processing the sensor trajectory solution for your TrueView, microdrones, guest sensor Cycles, as applicable. Alternatively, with more effort and…
Method Strip adjustment, also known as point cloud registration, is a topic that has been investigated in the areas of research where dynamic measurement systems are used. The goal is to remove inconsistencies in the point cloud. Most first studies of strip adjustment are concentrated on the estimation of the three boresight angles. Indeed, the…
LP360 Drone errs with, “An unexpected error occurred running POSPacBatch.exe” while submitting Post Process Trajectory File to POSPac Local. This is a generic unexpected error message whenever your POSPac project did not process to a successful solution using the InFusion Single Base processing mode and may be caused by one or more of the reasons…
Reckon has been deprecated and replaced by LP360 Online, including the LP360 Portal and LP360 Cloud. This page is no longer updated. Please visit the updated page on the new LP360 Portal User Management on the new LP360 Support Knowledge Base for the latest information. In order for someone in your company to be able…
User encounters “An error occurred creating the PostProcessTraj.txt file from the SBET. CRS Handler error: [Geown][CRS] LibProj: ‘Invalid value for an argument’” or “An error occurred creating the PostProcessTraj.txt file from the SBET. Error preparing transformer: [Geown][CRS] LibProj: ‘Invalid value for an argument’” when trying to Create TrueView Trajectories after successfully processing the sensor trajectory.…
One advantage of running Strip Align in the Job Manager in LP360 Drone is the ability to quickly view processing logs for each job. This comes in handy when a job fails and troubleshooting is required. One error that may be displayed in the processing log looks similar to this and denotes an invalid Strip Align (SAfE)…
