GeoCue’s repository of TrueView tools, tips and workflows for the TrueView line of drone mapping products. Includes former AirGon products such as Loki and ASPSuite.
What is a Point Cloud Task (PCT)? A function (Extract ground, Conflate Line) that operates on points, rasters, and/or vectors. A task can be a filter and/or an extractor. A filter classifies or changes the classification values for points (e.g. classify ground). An extractor extracts information from the point cloud data into vector, image or…
In configuring a set of control points or check points for use in the Control Points Report Dialog, it is best to follow the convention below to make the most use of the Drive Mode shortcuts available within the toolbar for navigation and filtering. The fields either need to exist in the shapefile or may…
Some scenarios may require you to process your TrueView 3DIS data with different lever arm offsets, IMU mounting angles, or Vehicle to reference angles than the ones recorded in the APX at the time of acquisition. For instance, if you move the system to a new drone, but forget to update the lever arm values…
In LP360 Drone, while attempting to process the sensor trajectory solution for a TrueView 3DIS or microdrones payload in the Cloud run location, the user encounters an error message stating, “Project Status: EXECUTION_FAILED” or “Sensor Trajectory Processing Failed”, where the Project upload was successful, but the project status is “Execution_Failed” and the status type is…
Flight Planning for LiDAR provides instructions for planning a flight to be used for LIDAR collection with a TrueView 3DIS. This section will provide guidelines for flight planning, followed by specific instructions for flight planning applications. The second section contains the TrueView Mission Planning Spreadsheet which can be utilized for calculating the line spacing, point…
Base station files must be in the RINEX format to be used by LP360 Drone, formerly TrueView EVO. If you have manufacturer generated formats straight off the receiver, they will not work. Converting Leica m00 files to RINEX can be done using a utility installed by LP360. Simplify the process by creating a simple batch…
In LP360 Drone, formerly TrueView EVO, the user has a number of options for post-processing the trajectory solution for a TrueView 3DIS. Applanix PP-RTX is one method that requires no local base station, is independent of CORS networks, and produces centimeter level accuracy globally. What is Real-Time EXtended (RTX) & Post-processed RTX (PP-RTX)? In the…
