Viewing two trajectories side-by-side in ASPSuite

Sometimes it is useful to view two flight trajectories side-by-side to ensure the correct amount of coverage is achieved. The following steps explain how to open to solutions in ASPSuite’s diagnostic window. Note: These steps assume the user has processed two flights through ASPSuite so that a pos file has been create for each flight.…

Share

Where can I see my Licenses in GeoCue?

How can I check my licenses and license usage in Geocue? GeoCue License Monitor on the GeoCue Server Machine shows dynamic license usage. License monitor has a table for in-use percentage over a period of time (set in settings), and a drop down menu to choose which license you’d like to visualize. It can be…

Share

Adjusting Intensities in GeoCue

When creating a greyscale (or inverted greyscale) LIDAR Ortho Raster, you may want to adjust how your intensity values are displayed in the output image(s). Off: This does not apply any adjustment to the intensities. Automatic (per image): Each image is automatically adjusted based on a % clip algorithm. The algorithm works by setting a…

Share

Can’t open software with a shortcut

After updating/upgrading a program, double-clicking the shortcut fails to open and gives this dialog shown in figure 1, stating, Problem with Shortcut: The parameter is incorrect.”. What is the target (right click the shortcut > properties) for the shortcut? This can also be found going to “Open File Location” in the context menu. You can…

Share

ASPSuite Error: Camera Event Interpolation FAILED!

While processing the Camera Event Interpolation step in ASPSuite, a user receives the error message, “Camera Event Interpolation FAILED! Index was outside the bounds of the array.” If you are using Loki with an M200/210 series or Phantom 4 Pro, you must plan and fly your mission in DJI GS Pro. The image positions will…

Share

Metashape: When using dedicated GPUs, please turn off integrated GPUs

Integrated GPUs will be included in the list of available devices (Tools>Preferences> GPU tab) if they are recognized by Metashape. To disable them, uncheck the box next to the GPU in the list which you wish to disable.  It will be up to the user to know if the GPU is integrated or dedicated. Metashape will…

Share

Terrasolid Tool Guides

There are many tools that exist within the Terrasolid product suite, including TerraScan, TerraModeler, TerraMatch, TerraPhoto and TerraSurvey. Remembering all of the tools and where to find them may prove difficult, particularly for beginner or casual users. To help we’ve created tool guides that provide the names of all the tools on each Terrasolid toolbar. These guides…

Share

DJI: Missing photos from first part of your flight

Your flight application indicated you collected more images than you are downloading from your SD card. The images you downloaded all seem to be from the end of the flight, and the images from the first part of the flight are missing. The number sequence of your photos reached 999, a new folder was created,…

Share

Phantom 4 RTK – Compass Calibration Instructions

Below are step-by-step instructions showing how to perform the compass calibration for the Phantom 4 RTK. Once in “Fly” Mode, tap the ellipse in the top right corner of the screen: In “Aircraft Settings”, scroll to the bottom of the options and tap “Advanced Settings”: Tap “Sensors”: Tap “Calibrate Compass”: Follow calibration instructions.

Share